PHE Condenser for Milk or Vegetable Oil Cooling
Cooking oil, special and indispensable ingredients of our daily diet, requires strict procedure during its production, among which JIEMA PHE Condenser for Milk or Vegetable Oil Cooling earns its name as the most beneficial oil cooler.
To find a proper oil cooler, gaskets made of EPDM are to be avoided as it has poor oil resistance. Having said that, JIEMA PHE Condenser for Milk or Vegetable Oil Cooling would be a perfect choice since we apply rubbers with strong oil resistance such as NBR and Fluorine Rubber.
Component Material
PHE Condenser sheet: SUS304, SUS316L, SMO254, Titanium, Nickel, Hastelloy Alloy
Frame: Carbon steel, stainless steel, coated stainless steel Gasket seal: NBR, H-NBR, EPDM, food pad, fluorine rubber, silicon rubber
Clamping bolt: Galvanized carbon steel, stainless steel
Interface: Rubber, carbon steel, stainless steel
Guide bar: Galvanized carbon steel, stainless steel
|
Material Description of PHE Gasket
|
Code
|
Applicable Temperature (ºC)
|
Anti-corrosive Performance and Applicable Occasions
|
|
NBR
|
N
|
-20~110
|
Hot air, water, non-polar oil, mineral
oil, lubricant and silicone oil, etc.
|
|
EPDM
|
E
|
-50~150
|
Vapor, polar chemical medium, alcohol, weak acid, weak alkali and oxidizing agent, etc.
|
|
Fluorine Rubber
|
F
|
0~180
|
Inorganic acid, alkali, mineral oil and
Haloalkane, etc.
|
|
Silicon Rubber
|
Q
|
-65~230
|
Resistant to cold current and dry hot
|
Những đặc điểm chính
High heat transfer coefficient
The corrugation of the sheet in Plate Heat Exchanger for Refrigeration can make fluids generate turbulent flow with minor Reynolds number; its heat transfer coefficient is 3-5 times as large as that of shell-and-tube heat exchanger, reaching 7,000W/m2K at the most.
(Heat Exchanger Plate&Gasket)
Small floor area
PHE Condenser features compact structure. The heat-exchanging area per unit volume is 2-5 times as large as that of shell-and-tube heat exchanger; the floor area occupied by Plate Heat Exchanger for Refrigeration is approximately one fifth to one tenth of the area occupied by shell-and-tube heat exchanger, given that the same heat exchange task is fulfilled by them.
Small temperature difference at the end
As for water-water heat exchange, the lowest temperature difference at the end can be lower than 1℃, which is extremely beneficial to the recovery of low-temperature heat energy.
Câu hỏi thường gặp
1. How long can we deliver a PHE Condenser?
15-40days after payment.
2. Can Plate Heat Exchanger in Refrigeration get dirty?
Đúng. As the operation proceeds, not only dust accumulates on the surface of plate heat exchanger, but also scale might forms at the wall. But don't panic just yet! PHE Condenser only need a thorough cleaning every two or three years depending on the real operating situtations. Unusual signals such as sudden increase of power consumption, longer time of heat transfer, and poor cooling water quality from the outlet could be a call for you to conduct a cleansing. Also feel free to ask us any related questions!
Câu hỏi thường gặp
Contact Now
